Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 7 - Jul 12
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
pedale heusinkveld Heusinkveld Ultimate+ Baseplate BlackHeusinkveld Ultimate+ Baseplate Flex free fixing for maximum performance The Heusinkveld Ultimate+ Baseplate is the ultimate solution for mounting Ultimate+ pedals on a rigid, adjustable platform designed to withstand forces of up to 140 kg , just like a real race car. If you're looking for a solid base that eliminates flex and allows for a clean, ergonomic, and adjustable installation, this baseplate is the perfect choice. Key advantages Ultra
Heusinkveld Ultimate+ Baseplate – Flex-free fixing for maximum performance
The Heusinkveld Ultimate+ Baseplate is the ultimate solution for mounting Ultimate+ pedals on a rigid, adjustable platform designed to withstand forces of up to 140 kg , just like a real race car. If you're looking for a solid base that eliminates flex and allows for a clean, ergonomic, and adjustable installation, this baseplate is the perfect choice.
Key advantages
- Ultra-resistant structure without bending , ideal for supporting competition loads.
- Full lateral position and depth adjustment for each pedal.
- Height-adjustable heel plate to optimize ergonomics.
- Includes brackets, hardware and cable glands for professional installation.
- Compatible with Heusinkveld Ultimate+ and Ultimate (classic) pedals.
Components included in the set
- Pedal mounting plate : with sliding slots that allow each pedal to be individually adjusted laterally and longitudinally.
- Heel plate : adjustable in two heights (0 mm or +30 mm with included spacers).
- Side supports : allow the entire baseplate to be fixed to the simulator in a solid and secure manner.
-
Complete set of screws for:
- Attach the pedals to the baseplate.
- Fix the baseplate to a base structure of at least 6 mm thickness .
Performance-oriented design and ease of installation
- The adjustment slots integrate T-nuts that allow the pedals to be moved without completely disassembling them.
- The Ultimate+ controller can be hidden under the plate for a clean installation.
- Cable management channels on the plate and brackets for organized cable management.
- 6 fixing points on the brackets for firm integration into aluminum profile structures or custom rigs.
Installation requirements
- This baseplate is not designed for use directly on the ground or on wheel stands .
- A fully structured cockpit is required, with solid anchorage between the seat and pedals.
Compatibility
| Product | Compatible with Ultimate+ baseplate |
|---|---|
| Heusinkveld Ultimate+ Pedals | ✅ Yes |
| Heusinkveld Ultimate Pedals (Classic) | ✅ Yes |
| Sprint or Pro pedals | ❌ Not compatible |
Technical specifications summarized
| Feature | Detail |
|---|---|
| Material | Steel with black finish |
| Settings | Pedal position (lateral/depth) + heel height |
| Heel plate height | 0 mm or +30 mm (with spacers included) |
| Rig mounting | Minimum 6 anchor points (screws included) |
| Pedal compatibility | Heusinkveld Ultimate+ and Ultimate |
| Requires full cockpit | Yeah |
Your foundation for real performance
The Ultimate+ Baseplate provides the necessary stiffness for Heusinkveld pedals to perform at their best . With precise adjustments and a professional design, it's the essential accessory for sim racers who don't accept compromises.
The Sim Pedals Ultimate+ platform is NOT compatible with the Sim Pedals Sprint or Sim Pedals. For the Sim Pedals Sprint platform, please click here .
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 1538 reviews
Sort
Product Reviews
★★★★★ 5
Quality
Quality item. Using a butcher block on top to make a desk.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026
★★★★★ 5
I love it!!!
Size: M Desk Unfinished 3/4-in and 1/2-in
Easy to assemble, all the pieces were in the box. I set everything out to be sure. Instructions were easy and clear, took about 10 min to put together.
Seems to be quality pipe, strong stable build even at just hand tight. When I put the desk top on it was already level so bonus there.
This kit is a great value, before I found the M desk I was looking on Pinterest for pipe leg designs thinking a trip to the hardware store and I could make it for cheaper, which was not the case. I 100% will recommend, and will purchase again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2020
★★★★★ 5
Real steel pipe
Size: O Desk Unfinished 3/4-in and 1/2-in
This pipe table leg set was great. It's real steel pipe like from the hardware store. It does have a layer of oil on it so that must be stripped using dawn or some other degreaser before handleing and painting. It is also offset in the middle bar so if you use it as a desk you get more leg clearance. I used it as a table base so I bought matching middle braces to set the middle support in the center of the table. Once together it looks great. I highly recommend getting this if you want a good quality pipe base.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2023
★★★★★ 5
Price / Quality - Office Desk - Perfect
Size: H Desk Unfinished 3/4-in and 1/2-in
Purchased two sets to create a custom L shaped desk for the office. Placed a pine stained top. Perfect to handle a monitor, multiple laptops, normal office equipment. Extra benefit is the cross piece at the bottom as a foot rest. Very sturdy while sitting on carpet. Compared to normal pipe material purchased in large box store -- could not have asked for a better product for the price. Looking at other products for additional projects for around the house for the product and vendor. - Highly Recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 27, 2021
★★★★★ 4
Fantastic style, good stability, customizable finish, and great customer service
Size: M Desk Unfinished 3/4-in and 1/2-in
Put this together in about April 2020 right about the crazy lockdown/quarantine/work-from-home timeframe. I knew that I wanted a simple hardwood desk with no drawers or stuff below the top. I have an ergonomic keyboard tray that I have attached to all my work desks for many years now, and it was too long for my old home desk, which was also made of MDF and was falling apart. Boo.
Enter this kit plus a butcher block top from the big box store. This kit went together easily. I had lost the instructions but a quick email to the JS Supplies company, and they hooked me up. By the time they sent it, I had actually figured out the part that was puzzling, which was what the all-thread pieces were for (the couplers between the elbows and the flanges on the top side).
I degreased all the parts with a simple Simple Green-type solution diluted in a 5 gallon bucket. I then sprayed the pieces with a satin nitrocellulose laqcuer (Minwax brand that I got from the home improvement big box). Worked great. I thought about doing a sealed rust finish using a science project volcano--vinegar and baking soda for a quick layer of rust on the outside--but I decided against it, as I wasn't sure of how stable the final product would be, even after a clear spray finish. The satin nitro finish looks great without even looking like a finish. I also coated the pieces with paste wax after the finish dried, just for good measure.
The one thing that is a bit disappointing is the stability... WITH MY TOP, mind you.I should be clear that the top that I'm using is a 1-3/4" thick monster piece of birch butcher block that is 60" x 30". I'm guessing that it's 40-50 pounds? Maybe more. This is probably WAY more weight than this leg set is made for. I also have the aforementioned keyboard tray that sticks out (torque equals force times lever arm) and causes even more torque. I get some shaking with the top with this setup. I have the desk on carpet; I was concerned that maybe the carpet and pad were not giving enough stability with the feet, so I made some plywood platforms for the feet. I also carefully leveled the feet to make sure it wasn't just uneven legs that was causing the instability. Still shakes no matter what I tried.
I think it's just that I have such a heavy top--more than this thing is spec'd for. That's totally fine, and I don't want to knock off a bunch of stars for that. I leave these comments more as a "don't do what I did" thing. Just be advised that you need to limit the weight of the top to something reasonable.
The design of one upright on each side of the desk with a pipe coupler in between is probably the weak spot with my heavy desktop; I'm thinking of either adding tension on either side (with some threaded rod and turnbuckles) or some extra supports with something like the Steel-Tek pieces from Lowe's.
Overall, I'm very satisfied with the product and the company!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 23, 2020